How to clean your house with a pressure washer without damaging it

Cleaning your home with a pressure washer might seem like the perfect solution to cleaning your home quickly, but it can also lead to serious damage if you’re not careful. Here are some tips for cleaning your home with a pressure washer without damaging it.

1. Don’t focus too long on one point.

Do not aim your siding for more than 10 seconds at a time. When cleaning with the power of a water jet from a pressure washer, it is easy to damage or unintentionally strip paint from wood, concrete, vinyl siding and other materials used on exterior surfaces. If this starts to happen, just turn off the pressure washer and let things dry for several hours before trying again – aiming for less than half the pressure usually helps too.

2. Start at the top and work your way down

Start on your roof with a light spray of cleaner, then work your way down to areas that can get dirty quickly. This is especially important when dealing with vinyl siding. If you’re not careful, you’ll get soap scum from the upper windows washing into the lower windows, so be patient and work in sections for best results. If you go the other way, going up, you can potentially ruin the good paint you just put on by washing it off with water.

3. Don’t Forget Windows

Don’t forget to clean your windows – they may seem like a surface that doesn’t need cleaning, but if you neglect them, things will get dirty quickly. Most pressure washers have a special nozzle for this purpose – be sure to use one if necessary, as high pressure water can damage glass surfaces if directed directly at them. This is also important because it can be easy to get soap scum on your windows if you accidentally wash them along with the siding or other surfaces. Just be sure to use a softer setting when dealing with windows and anything glass.

4. Always test in an invisible area first

Always test your pressure washer on a surface that is not visible to ensure that it will not damage or strip the paint from the material before beginning any major cleaning project of a whole house, porch , a patio, etc. going to pressure wash the exterior of your home, check all the possibilities first. For example, warped or splintered wood can worsen when exposed to water, so always make sure there is adequate protection before using high pressure equipment on it. If necessary, use drop cloths or other covers to make sure you don’t accidentally do more harm than good when cleaning your home with a pressure washer.

These are just a few of the most important points to remember when using a pressure washer on your home or other construction project. There are plenty of experts out there who can help you learn how to do things without causing harm, so don’t be afraid to seek advice if you’re unsure about anything involving the use of pressure washers – c is better than making costly mistakes that could have been avoided with a simple consultation!

Comments are closed.